English

I-JSY-MK-163 Imojula yokulinganisa amandla kagesi yesigaba esisodwa esisodwa

I-JSY-MK-163 Imojula yokulinganisa amandla kagesi yesigaba esisodwa esifakiwe Isithombe esifakiwe
  • I-JSY-MK-163 Imojula yokulinganisa amandla kagesi yesigaba esisodwa esisodwa

Incazelo emfushane:

1. Hlangana nezindinganiso zokulinganisa ezicacisweni zenqwaba yokushaja ethi jjg1148-2018 kanye ne-gb_t_17215.321-2008.

2. Iphrothokholi ye-MODBUS-RTU.

3. Kala ngokunembile i-voltage ye-AC yesigaba esisodwa, yamanje, amandla, isici samandla, imvamisa, ubuningi bukagesi neminye imingcele kagesi.

4. I-interface eyodwa yokuxhumana ye-TTL, ehambisana ne-5v/3.3v.

5. Ukufakwa kukagesi ukumelana ne-voltage engu-3000VAC.

6. Ukucaciswa okuningi kungakhethwa, ukujika okukodwa ngokusebenzisa i-PCB eyinhloko engaguquki noma i-transformer evulekile, elula futhi elula ukuyisebenzisa.

7. Ingashintshwa futhi yenziwe ngezifiso ngokwezidingo zamakhasimende.


Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Incazelo

Ikakhulukazi, kwamukelwa isekethe yokuhlukanisa kagesi ephelele, exazulula inkinga yokuphepha yokungahlukaniswa nogesi oqinile ezinhlelweni zokusebenza zemboni ehlukahlukene, futhi ingashumekwa kalula kumishini ehlukahlukene edinga ukukala ukusetshenziswa kwamandla.

I-module yesigaba esisodwa sokulinganisa amandla kagesi we-mutual inductance ingasetshenziswa kabanzi ekuguquleni ukonga amandla, amandla, ukuxhumana, ujantshi, ezokuthutha, ukuvikelwa kwemvelo, i-petrochemical, insimbi nezinye izimboni ukuqapha ukusetshenziswa kwamanje namandla emishini ye-AC.

Ipharamitha yezobuchwepheshe

1. Okokufaka kwe-AC kwesigaba esisodwa
1) Ibanga le-voltage: 100V, 220V, 380V, njll.
2) Ibanga lamanje:5A, 50a, 100A, njll., kanye nemodeli ye-transformer yamanje evulekile yangaphandle uyazikhethela.
3) Ukucubungula isignali:I-chip ye-metering ekhethekile iyamukelwa, futhi i-24 bit AD yamukelwa.
4) Umthamo wokulayisha ngokweqile:1.2 izikhathi ububanzi busimama;I-current (<20ms) yamanje izikhathi ezingu-5, i-voltage iyizikhathi ezingu-1.5, futhi ububanzi awonakali.
5) I-impedance yokokufaka:isiteshi sikagesi >1k Ω /v.

2. Isixhumi esibonakalayo sokuxhumana
1) Uhlobo lwesixhumi esibonakalayo:Indlela engu-1 yokuxhumana ye-TTL, ehambisana ne-5v/3.3v.
2) Iphrothokholi yokuxhumana:Iphrothokholi ye-MODBUS-RTU.
3) Ifomethi yedatha:isofthiwe ingasetha okuthi "n, 8,1", "E, 8,1", "O, 8,1", "n, 8,2".
4) Izinga lokuxhumana:isilinganiso se-baud singasethwa ku-1200, 2400, 4800, 9600bps;Izinga le-baud lingu-4800bps ngokuzenzakalelayo.

3. Okukhipha idatha yokulinganisa
I-voltage, yamanje, amandla, isici samandla, imvamisa, inani likagesi kanye nezinye imingcele kagesi.

4. Ukuhlukaniswa kukagesi
Ukunikezwa kwamandla okuhloliwe kanye nogesi kuhlukanisiwe komunye nomunye, futhi i-voltage yokumelana ne-isolation ingu-3000VAC.

5. Ukunikezwa kwamandla
I-DC single power supply 5V amandla, ukusetshenziswa kwamandla 8~10ma.

6. Indawo yokusebenza
1) Izinga lokushisa lokusebenza:-20~+70 ℃;Izinga lokushisa lesitoreji: -40~+85 ℃.
2) Umswakama ohlobene:5~95%, akukho ukufingqa (ku-40 ℃).
3) Ukuphakama:0 ~ 3000 amamitha.
4) Imvelo:indawo engenakho ukuqhuma, igesi ebolayo kanye nothuli olubambayo, futhi ngaphandle kokuzamazama okubalulekile, ukudlidliza nomthelela.

7. Ukwehla kwezinga lokushisa:≤100ppm/℃.

8. Indlela yokufaka:PCB Welding, usayizi indiza module kuyinto 25.6 * 43.3mm.

9. Usayizi wemojula:25.6*43.3*29mm.

  • Okwedlule:
  • Olandelayo:

    • IMIKHIQIZO EHLOBANE